Type 450 conveyor roller

Type 450 conveyor roller

The FASTRAX Type 450 roller drive has a single 11 tooth x 1/2 “ pitch nylon sprocket and is designed for use in light duty driven roller conveyors. The roller can be made as either a fixed drive or a friction drive roller. Also available in stainless steel tube, spindle and bearings to be used in the food handling industry as a higher specification alternative to grooved rollers. In addition a true taper roller is available to suit 800mm inside radius bends.

Specification

Load rating

30kg per roller (dependent on roller length)

Bearing specification

Precision - options of steel shielded or 2RS bearings available Mild steel or stainless steel bearing options also available

Tube material options

Mild steel, self colour / zinc plated, stainless steel

Spindle material options

Mild steel, self colour / zinc plated, stainless steel

Spindle type options

Spring loaded, female threaded, male threaded, flatted, cross drilled

Type 500 conveyor roller

Type 500 conveyor roller

The FASTRAX Type 500 roller is available with single or double sprocket options. The 14 tooth x 1/2" pitch sprockets are also available in either steel or nylon, to suit your individual needs. Diameter options ranging from 50mm up to 102mm and can be fully welded for maximum high load rating, especially when used in pallet handling systems. The roller can also be made with stainless steel tube, spindle and bearings to be used in the food handling industry, with the nylon sprocket option for light loads and a fully stainless steel option if required. In addition a true taper roller is available to suit 800mm inside radius bends.

Specification

Load rating

200kg per roller (dependent on roller length)

Bearing specification

Precision - options of steel shielded or 2RS bearings available Mild steel or stainless steel bearing options also available

Tube material options

Mild steel, self colour / zinc plated, stainless steel

Spindle material options

Mild steel, self colour / zinc plated, stainless steel

Spindle type options

Spring loaded, female threaded, male threaded, flatted, cross drilled

Type 510 conveyor roller

Type 510 conveyor roller

The FASTRAX Type 510 roller is available with single or double sprocket options. The 15 tooth x 5/8" pitch sprockets are fully welded to the roller tube in diameters from 76mm up to 102mm. Especially suited to extremely heavy duty pallet handling systems. The roller can also be made with stainless steel tube, spindle and bearings to be used in the food handling and chemical industries. A fully stainless steel option with stainless steel sprockets is available if required.

Specification

Load rating

250kg per roller (dependent on roller length)

Bearing specification

Precision - options of steel shielded or 2RS bearings available Mild steel or stainless steel bearing options also available

Tube material options

Mild steel, self colour / zinc plated, stainless steel

Spindle material options

Mild steel, self colour / zinc plated, stainless steel

Spindle type options

Spring loaded, female threaded, male threaded, flatted, cross drilled